| Marine
Diesel Exhaust Hose |
This fully approved hose verified by both Lloyds (Cert 91-01-98) and DNV is suitable
for exhaust gas and sea water on stationary and moving diesel engines. The single
wire helix makes this hose very flexible and can be removed to give a soft cuffed
end to provide for quick and easy installation. Also available in convoluted cover
for even greater flexibility. Mandrel built, up to bore size 305mm. Det Norske
Ventas approved for Fuel Filler Applications. Our Marine Diesel Exhaust hose is
Mandrel built, constructed with a Black Nitrile lining (55% Aromatic resistant),
with a fire resistant chloroprene cover. Reinforcement is provided by a 2-ply
polyester tyre card, 1 layer of breaker fabric and a wire helix. Available
in 61m coils or per Metre. Larger bores to order. |
| No. | I.Dia. mm
| Dia. mm
| Work
Pressure | No. | I.Dia
mm | Dia. mm | Work
Pressure | | 491063 | 19 | 31 | 11 | 491070 | 57 | 71 | 6 |
| 491064 | 25 | 37 | 11 | 491071 | 60 | 74 | 5 |
| 491065 | 32 | 44 | 14 | 491072 | 63 | 78 | 5 |
| 491066 | 38 | 50 | 8 | 491073 | 76 | 90 | 4 |
| 491067 | 40 | 52 | 8 | 491074 | 80 | 94 | 3 |
| 491068 | 45 | 57 | 7 | 491075 | 90 | 108 | 3 |
| 491069 | 51 | 63 | 7 | 491076 | 102 | 120 | 3 |
|
| Radiator
Hose |
Mandrel
Built, radiator hose with black Antifreeze resistant rubber tube, 2-ply polyester
tyre cord reinforcing and black SBR heat, abrasion and weather resistant cover.
Available in 1m lengths, and suitable for working pressures up to 3.06 bar (45psi)
|
| No. | Bore
mm | No. | Bore
mm | No. | Bore
mm | No. | Bore
mm | | 499303a | 12 | 499303f | 28 | 499303k | 40 | 499303p | 57 |
| 499303b | 16 | 499303g | 30 | 499303l | 42 | 499303q | 60 |
| 499303c | 19 | 499303h | 32 | 499303m | 45 | 499303r | 65 |
| 499303d | 22 | 499303i | 35 | 499303n | 48 | 499303s | 76 |
| 499303e | 25 | 499303j | 38 | 499303o | 51 | 499303t | 102 |
|
| Bilge
Blower Hose |
Made of PVC coated glassfibre cloth with supporting spring steel helix, this blower
hose is lightweight, economical and fire resistant to BS476, parts 6, 7 and 20.
It is supplied in 6m coils or per metre |
No.
491098 75mm Bore No. 491099 100mm Bore |
|
 |
| Fuel
Line Hoses |
B SAU108-2
Petrol Hose is a purpose made petrol hose with a rubber lining suitable for leaded
petrol and diesel (not recommended for unleaded petrol). Available in 100m Coils
or per metre.
Black
Petrol/Oil/Air Hoseis a nitrile lined hose suitable for fuel lines with working
pressure up to 18batt. It is suitable for petrol (leaded and unleaded) and diesel,
and is available in 40m coils or per metre. |
| B
SAU 108/2 Hose | Petrol/Oil/Air
Hose | | No. | Bore | No. | Bore |
| 499308a | 5 | 491091 | 6 |
| 499308b | 6 | 491092 | 8 |
| 499308c | 8 | 491093 | 10 |
| 499308d | 10 | 491094 | 12 |
| 499308e | 13 | 491095 | 16 |
| | | 491096 | 19 |
| | | 491097 | 25 |
|
|
Fuel Filler Hose |
Flexible blue PVC hose with semi rigid crush resistant PVC spira l reinforcing;
It is ideal for diesel and petrol (both leaded and unleaded) fuel filler applications
or in any application where fuel is not required to lie in the hose over time.
It is also suitable for any other suction/delivery application including heavy
duty bilge pump duties. Available in 30m coils or per metre.
|
| No. | Reference | Bore |
| 491090B | P600E | 38mm |
| 491091B | P800E | 50mm |
|
| Fuel
Hoses |
Marine Fuel Hose ISO 7840-A2 Fire resistant nitrile hose with synthetic textile
yarn reinforcement and Neoprene outer cover, as specified by British Waterways
and the U.K.'s Environmental Agency. Suitable for boats up to 24m (78ft) LOA with
permanently installed diesel engines. Suitable for leaded fuels, unleaded fuels,
diesel, with an aromatic content not exceeding 50%. Suitable for applications
up to 10 bar working pressure and in a temperature range of -20Deg. to +80Deg.
Centigrade. Supplied in 10m coils or per metre.
|
| No. | Bore | No.
| Bore |
| 497840 | 6mm | 497845 | 19mm |
| 497841 | 8mm | 497846 | 25mm |
| 497842 | 10mm | 497847 | 38mm |
| 497843 | 12mm | 497848 | 50mm |
| 497844 | 16mm | 497849 | 55mm |
| |