| Spinnaker
Varnish |
Conventional
Spinnaker is one of the most highly respected names in varnish. Spinnaker has
been tried and tested through literally millions of nautical miles and proven
beyond doubt to be Britain’s finest varnish for all types of craft, from
ocean going yachts to sailing dinghies and canal boats. That’s why so many
experienced sailors put so much faith in Spinnaker Yacht Varnish. |
| No.
053133 | (250ml) |
| No.
053135 | (1
litre) | | No.
053134 | (500ml) |
| No.
053136 | (2.5
litres) | |
| Spinnaker
Polyurethane Varnish |
Polyurethane 
One-Can polyurethane varnish is extremely tough. Spinnaker One Can Polyurethane
dries within four hours, which means you can apply several coats in a single day.
Like Spinnaker's conventional varnish, One Can Polyurethane not only protects
and seals all year round, it also gives a deep durable gloss finish. The boat's
varnish is first in line to take a battering from the elements . Experienced sailors
insist on Spinnaker every time. |
| No.
053137 | (250ml)
| | No.
053139 | (1
litre) | | No.
053138 | (500ml) |
| No.
053140 | (2.5
litres) | |
|
 |
| Nitromors
Craftsman’s (Original) | NITROMORS
CRAFTSMAN’S
has been around for over forty years, and thousands of professional and amateur
decorators
swear by it. It is a light, free-flowing liquid which is ideal
for many surface coatings. It flows quickly into mouldings and crevices - very
useful if you’re renovating an old clinker built boat, old furniture, or
an old house. Nitromors Craftsman’s is neutralised by wiping down the surface
with white spirit. One important advantage this gives is that you don’t have
to sand down delicate woods because Nitromors Craftsman’s doesn’t raise
the grain the way that water might. |
| No.
053101 | (5
litres) | | No.
053104 | (500ml)
| | No.
053103 | (1
litre) | | No.
053105 | (250ml) |
|
| Nitromors
Varnish Remover |
Nitromors Varnish Remover is a semi-gel consistency to give better application
control. As its name implies Varnish Remover is ideal for removing new type polyurethane
varnishes and the more traditional copal varnishes. This remover acts by partially
crystallising the varnish thereby making it simple and easy to remove without
damaging the delicate wood underneath. It is washed off with methylated or white
spirits. |
| No.
053115 | (250ml.) |
| No.
053114 | (500ml.) |
| No.
053112 | (2
litres) | | No.
053111 | (5
litres) | | No.
053113 | (1
litre) | |
| Nitromors
All Purpose |
(Water Washable)
Nitromors All Purpose Water Washable is a semi-gel, so it
doesn’t flow nearly as rapidly as the Craftsman’s. It's just the thing
for a broad, flat area, and because it clings so well it's also ideal for vertical
surfaces. You wash it off with water as its name suggests. If you’re working
with a delicate wood and want to avoid raising the grain, you can wash off with
white spirit instead. |
| No.
053110 | (250ml.) |
| No.
053109 | (500ml.) |
| No.
053108 | (1
litre) | | No.
053107 | (2
litres) | | No.
053106 | (5
litres) | | |
