The
full range of RWO performance sailing equipment is available to order from Western
Marine and the full RWO catalogue is available on request. Among the most popular
fitting stocked, the products shown here are versatile and practical, and have
a multitude of uses aboard craft of many types and sizes, as well as in a host
of non-marine applications.
Bullet
Blocks
All have 25mm dia. sheaves, with hollow sheave pivots to allow attachment of beckets,
top kits or direct fixing of block to decks or spars.
Bearing
SWL
Max8mmRope
Max10mmRope
Plain
320kg
461420
461430
Roller
110kg
465180
465190
Swivel
Blocks
These bullet blocks are similar to those above but feature integral swivel with
clevis pin and split rings. Hollow sheave pivot allows attachment of becket. Available
in the plain bearing type only, they have a Safe Working Load (SWL) of 225kg.
No.
461450 For 8mm Rope No. 461460
For 10mm Rope
Becket
Kits
Becket blocks can be formed by adding these kits to either 10mm or 8mm Bullet
blocks, or Swivel blocks. Becket kits can be combined with Top Kits on 8mm Bullet
Blocks to form treble with becket etc.
No.
466340 Becket for 8mm Blocks No. 466350
Becket for 10mm Blocks
Top
Kits
RWO's top kits are designed to allow you to combine 8mm Bullet Blocks 461420 and
465180 into double and triple blocks. Becket blocks can be made by adding the
becket kit 466340 to form doubles with becket
etc.
Two swivels bases are available. The lightweight model takes two M5 fasteners
and has a SWL of approx. 520kg. The standard model has a round base, 45mm in dia.,
with 560kg SWL. Both have a central plain bearing pillar, 12mm high to accommodate
5mm shackle pins.
No.
461860 Lightweight Base No. 461871
Standard Base
Springs
These popular springs have a variety of uses, but are most commonly used to support
stand- up blocks when not under load. They can be used in conjunction with eye
straps or swivel bases.
All have 25mm dia. sheaves, with hollow sheave pivots to allow attachment of beckets,
top kits or direct fixing of block to decks or spars. 
These bullet blocks are similar to those above but feature integral swivel with
clevis pin and split rings. Hollow sheave pivot allows attachment of becket. Available
in the plain bearing type only, they have a Safe Working Load (SWL) of 225kg.
Becket blocks can be formed by adding these kits to either 10mm or 8mm Bullet
blocks, or Swivel blocks. Becket kits can be combined with Top Kits on 8mm Bullet
Blocks to form treble with becket etc. 
RWO's top kits are designed to allow you to combine 8mm Bullet Blocks 461420 and
465180 into double and triple blocks. Becket blocks can be made by adding the
becket kit 
Two swivels bases are available. The lightweight model takes two M5 fasteners
and has a SWL of approx. 520kg. The standard model has a round base, 45mm in dia.,
with 560kg SWL. Both have a central plain bearing pillar, 12mm high to accommodate
5mm shackle pins. 
These popular springs have a variety of uses, but are most commonly used to support
stand- up blocks when not under load. They can be used in conjunction with eye
straps or swivel bases. 
