| Adjustable
Outboard Motor Bracket |
 Adjustable
outboard motor bracket with security stopper. Adjuststo 4 different positions
for differing transom heights. Made of anodised aluminium with stainless steel
spring, nuts and bolts. Varnished timber plate. Mounting bolts and instructions
included.For motors up to 20hp and 45kg. |
| No. 132703. |
| Rail
Mounted Outboard Bracket | 
Useful outboard storage bracket, easily mounts onto pushpit or pulpit rails, to
save usable space on board. | | No.
480567 |
| Outboard
Motor Bracket |
 Fixed height
outboard bracket. Made of stainless steel and varnished wood. Complete with two
stainless steel fasteners. Trim adjustable from 0Deg - 17Deg. |
| No.
480573 Up to 20hp. |
| Outboard
Lock |
A range of strong stainless steel pipes which slide over the motor's thumbscrews
holding them locked. Complete with noncorroding brass locks. |
No.
480581 Square stainless steel tube for smaller Evinrude, Mercury and Johnson
outboards as well as many other makes. Length 32cms. Diameter 30mm. Thumbscrew
accommodation 15mm.
No. 480582 Large Circular pipe for bigger outboards.
Length 32cms. Diameter 40mm. Thumbscrew accommodation 15mm. |
| Fuel
Tank Brackets |
|
 Brackets
for fixing fuel tanks and batteries, battery boxes etc. Fastened with screws.
| No.
151860 Brackets with Tie Down strap
No. 151900 Tie Down Strap
only |
| |
| Safety
Tether Switches | 
These “Dead Man” switches are suitable for a variety of uses, including
outboard engine cut-out function. | No.
018685 Red Cap Dead Man Switch makes the circuit when the cap is removed
- for ignition systems which require the circuit to be shorted to earth for emergency
cut out e.g. most outboards.
No. 018689 Grey Cap Dead Man Switch breaks
the circuit when the cap is removed - for ignition systems requiring the circuit
to be de-energised for emergency cut out e.g. most inboard petrol engines. |
| "Dead
Man Switch" Cords |
 Coiled
red cord for dead man switches. It can be attached to any of the "Dead Man"
switch keys shown above and is connected at the other end to the helmsman. |
| No.
151744 |
| Ignition
Starter Switch
| |
Made of brass and stainless steel, this is a three position switch which returns
automatically to “ON” from “START”. Measures 73x40mm. Mounting
barrell 21mm Dia.x 25mm Long | | No.
018684 Ignition Starter Switch |
| Battery
Boxes |
These plastic battery boxes are resistant to spillages of petrol and acid. The
small box measures 25 x 35 x 24cm, the big one 25 x 43 x 24cm. Strap included.
|
No.
151789 Small
No. 151788 Large |
| "Dead
Man Switch" Keys |
A range of plastic
keys to suit Dead Man switches on most popular outboards. |
| No. | Outboard | No. | Outboard |
| 151989 | Mercury/Mariner | 151992 | Honda/OMC |
| 151990 | Mariner | 151993 | OMC |
| 151991 | Tohatsu | 151994 | Yamaha |
| |
