| Ratchet
mount - RA 135 |
Ratchet mount reinforced nylon UV resistant.
Four way ratchet mount for installation on deck or bulkhead,
locking by knob.
Hole for loran or GPS cable.
For antennas max 8' in self supporting installation built in
feed - thru for coax cable.
Standard thread 1"x14. |
| No.
072344 |
| Universal
mount - V 1974 |
 Universal
mount stainless steel.
For supporting antennas and extensions.
Standard thread 1" x 14, weight 240 grs.
Height 100 mm. (4”). |
| No.
072347 |
| Universal
mount - V 1975 |
 Universal
mount reinforced nylon only for GPS antennas.
Can be used in addition to RA129 extension. Standard thread
1" x 14. Weight 50gr. Height 10cm (4”). |
| No.
072357 |
| V
9171 |
Pipe mounting bracket in stainless steel, thread 1”x14.
For horizontal and vertical mount.
Weight 600 gr. For tubes diam. 25-80 mm.
ELECTROPOLISHED |
| No.
230813 |
| Rail
ratchet mount - RA 125 |
Rail ratchet mount reinforced nylon U.V. resistant.
Ratchet design with hole for loran or GPS cable.
Vertical or horizontal installation on rails of 7/8" (22mm)
and 1" (25mm).
Designed for antennas up to eight feet.
Standard thread 1"x14. |
| No.
230824
|
| Antenna
Brackets |
Nylon adjustable antena mounting bracket, suitable for all
antennas with 14tpi threads.
No. 481394
Chrome on Brass adjustable mounting bracket. Suitable for
all antennas with 14tpi.
|
| No.
113287 |
| DG3-8 |
 Through-Deck
Gland for cable 3mm to 8mm. Supplied with blanking off cap.
Allows VHF cable to pass through deck or bulkhead without removing
plug.
|
| No.
230828
|
| Male
Antenna Connector - RA 132 |
 PL259
male connector for RG58/U.
Twist on. |
|
No.
072321
|
| Double
female connector - RA 133 |
 PL258
Double female connector for PL259. |
| No.
072322 |
| bnc5 |
A pair of push & twist in-line connectors for joining 5mm
dia coax such as RG58CU. Supplied with damp-proof seals.
|
| No.
230816 |
More
Antennas |
|
| Masthead
bracket - V 1976 |
Masthead bracket in stainless steel. Height 20cm (8”).
Electropolished |
| No.
072346 |
| Stand
off bracket - RA 119 |
Stand off bracket - reinforced nylon for bulkhead and rail of
25mm (1") and 30mm. Accepts 38.5mm (1.5") antennas. |
| No.
230815 |
| Ratchet
mount - RA 116 |
Ratchet mount polished stainless steel. Four way ratchet mount
for installation on deck or bulkhead,locking by handle.
Hole for loran or GPS cable.
The exclusive built-in feed-thru allows the passage of coax
cable.
Standard thread 1"x14".
ELECTROPOLISHED |
| No.
072342 |
| Ratchet
mount - RA 115 |
Ratchet mount reinforced nylon UV resistant. Four way ratchet
mount for installation on deck or bulkhead, locking by handle.
Hole for loran or GPS cable.
The exclusive built-in feed-thru allows the passage of coax
cable.
For antennas max 9' in self supporting installation.
Standard thread 1"x14. |
| No.
072341 |
| Rail
mount - RA 145 |
|
 Rail
mount reinforced nylon UV resistant.
For installation of GPS antennas on horizontal rails of 7/8"
(22mm) and 1" (25mm), (can be used in addition to RA129 extension).
Standard thread 1"x14.
|
| No.
230810 |
| RA
140 |
 Nylon
Feed -Thru For deck passage of one or two coaxial cables and
connectors (RG58 or similar). |
| No.
072345 |
| PVC
gasket - V9101 |
 PVC
gasket for alluminium surface insulation for V9174 and V9124.
|
| No.
072348 |
| adapt1 |
|
Adapts a 1"x 14tpi RangeMaster mount to accept an M16 YachtMaster
antenna. |
|
No. 230817 |
| adapt2 |
|
Adapts a 16mm YachtMaster bracket to accept a 1"x 14tpi
RangeMaster antenna. |
| No.
230818 |
| n5 |
DeckMate waterproof deck connector for 5mm coax. Inherhently
water-proof but supplied with rubber boot for extra protection.
|
| No.230822 |
| Chart
plotter mount - RA 136 |
 Kit
for installation of electronic chart plotters allows installation
of the plotters on a vertical tube diam. 25mm (1”) and 22mm
(7/8”).
The plotter can be adjusted on the vertical and horizontal axis,
when not used the mount can be folded by the swivel rail mount
installed on the vertical tube. |
|
No.
072358
|
| Chart
plotter mount - RA 137 |
 Kit
for installation of electronic chart plotters, allows installation
of plotters on a horizontal tube of 25mm (1”) and 22mm (7/8”)
diameter.
The plotter can be adjusted on the horizontal axis by the ratchet
lock UP. |
|
No.
072359
|
|
