Western Marine - Irelands largest marine distributor
Western Marine Irelands largest marine distributor dublin ireland

RULE BILGE PUMPS
Rule submersible bilge pumps have set the standard for the industry for many years.
They are the first choice of yachtsmen and commercial fishermen throughout the world. More innovations in bilge pump design have come from Rule Industries than from any other manufacturer. Two ranges are offered, the Heavy Duty range, for commercial users, workboats or anywhere bilges might contain debris or oily water, and the Leisure range for yachts and craft with clean bilges. If in doubt, fit a Heavy Duty pump.
Features common to all Rule Pumps:
Rule Pumps
• Stainless Steel Shafts
• Anti Airlock Feature
• Rule Seals
• Quick Operation
• Water Cooled Motor
• Totally Submersible
NumberModelOutputVoltsAmpsHoseMax Head WeightHxW(mm) Use
023065102000GPH128.4A1.1/8"16ft 1.4kg 152x108Heavy Duty
023066122000GPH244A 1.1/8" 16ft 1.4kg 152x108 Heavy Duty
02306716A3700GPH247A1.1/2"23ft2.4kg 184x124 Heavy Duty
01010614A3700GPH1215.5A 1.1/2"23ft 2.4kg 184x124 Heavy Duty
02310720A1000GPH122.9A1.1/8"11ft 0.4kg101x72 Leisure
02310625D500GPH121.9A 3/4" 11ft 0.25kg89x60 Leisure
02310866Bracket for 500GPH Pump (For mounting onto vertical)
02311069Hose Adapter (1 1/8" outlet or hose to 3/4" or 5/8" I.D. Hose)

Mariner Submersible Bilge Pump
Bilge PumpIf you’re looking for value for money in submersible bilge pumps, the Mariner range has few equals. Totally submersible and with high impact and heat resistance they are ideally suited to yachts and other craft with clean bilges. They are not recommended for use in craft with bilge debris, oily water etc. typically found aboard workboats, fishing boats etc.
Number Open Flow Output Volts Outlet
215120 500GPH 12v 19mm
215121 1000 GPH 12V 25mm
215122 1500 GPH 12V 25mm
215123 2000GPH 12V 25mm
 
RULE AUTOMATIC BILGE PUMP
Rule's 500 Automatic Bilge Pump has been a runaway success. It combines a 500 GPH submersible bilge pump with a debris proofed float switch in one compact unit. Its compact dimensions make it easy to install in most applications and its shaft seal, stainless steel shaft and long life motor make it an all round winner. Outlet fits 3/4" I.D. Hose.
No. 035114 Rule Auto Bilge Pump.

Bilge Blowers
Bilge Blowers
Bilge Blowers
Bilge Blowers
Skipper inline blowers remove fumes with surprising efficiency. The strong ABS housing incorporates 3" barbs and mounting bracket. Ignition Proof.
No. 112016 12V Inline Blower
No. 112017 24V Inline Blower

Attwood In Line Blower
Made of corrosion resistant materials, this unit meets NMMA and ABYC standards. Delivers 145 cu.ft/min.
For 3" Hose.
No. 023003 12V In Line Blower
Skipper Bulkhead Blower. Delivers 99 cu.ft/min
No. 215086 12V Blower No. 215102 12V w/mounting bracket.
No. 215087 24V Blower


FLOAT SWITCHES

FLOAT SWITCHES Float switches perform an inportant function and it is important to fit only high quality units. We recommend fitting two float switches for extra protection. The Rule-a-matic can cope with up to 14 Ampere current draw and is suitable for pumps up to 2000gph. We recommend protecting it with Rule's Debris Guard.
No. 010104 Rule-a-matic Float Switch
No. 010132 Debris Guard

Bulloch Harbour, Dalkey, Co.Dublin, Ireland. Tel: +353 -1- 2800321( 9Lines) Fax:+353 -1- 2800327
© Western Marine 2008
Site produced in association with VooDoo

Home Contact Special Offers Notice Board Click here to print this page Go to Index A Go to Index B Go to Index C Go to Index D Search