| 
• Fits 3/4" (19mm) Hose to boat's holding tank.
• Tapered Throat
grips hose from shore tank.
• Flange Dia.73mm
Hole Dia. 45mm
• Key and I.D. plate standard.
• Bronze finish to special order
| | No.
125402 Leesan Rinse Out Fitting |
| 
Designed to prevent water being syphoned onto the boat via the toilet, a vented
loop is essential where plumbing is connected to any skin fitting below the waterline.
Our vented loops allow air into the line via the vent when not in use which seals
up as water passes through the loop. An optional hose tail allows connection to
a deck or hull mounted ventilator using 6mm hose. |
No.
125407 Vent Hose Tail 3/4" (Toilet Inlet)
No.
125411 Vent Hose Tail 1" (Electric Macerator)
No.
125412 Vent Hose Tail 1.1/2" (Toilet Discharge) |
| Ball
Valves |
The Western Marine
range of full bore ball valves have widely used BSP threads and are suited to
toilet installations. |
| Part
No. | Pipe
Thread |
Part No. |
Pipe Thread | | 049301 | 1/4"
| 049305 | 1" |
| 049302 | 3/8"
| 049306 | 1.1/4" |
| 049303 | 1/2" | 049307 | 1.1/2" |
| 049304 | 3/4"
| 049308 | 2" |
|
| P | 
Enables deck fitting without probe o-ring facility (threads only) to connect to
quayside probe. Also improves pumping efficiency for deck fittings with worn seals.
Fits ISO4567 G1.1/2" (1.1/2" BSP threads) |
| No.
125408 |
| Also
Available | |
Pump Out Station Sign
GRP sign with logo to ISO standard
No.
125406 Pump Out Sign Holding Tanks Both rigid and flexible available.
| | Ask
for details. | | |
| 
• Standard type pump out fitting connects to both probe and screw type quayside
pump out stations.
• Flange Dia. 99mm. Hole Dia. 65mm
• Easily
replaceable O-Ring for a good seal to pump out station probe.
• Complete
with hex head key and identification plate.
• Polished chrome as standard
- brass to special order.
• Accepts hose of 38/50/63mm dia. from holding
tank. | | No.
125401 Leesan Pump Out Fitting. |
|
• Developed specifically for marine installations, it combines excellent
odour protection and flexibility.
• Smooth internal & external surfaces
ensure a snug fit onto connections.
• Fits standard 1.1/2" (38mm)
toilet outlets.
• Minimum Bend Radius 100mm.
• Weight 0.76kg./m
• Suitable for toilet waste only. |
| No.
125403 Leeflex Toilet Outlet Hose Also
available is less expensive sanitation hose for toilet inlet and
electric
macerator toilet installations.
No. 491079
3/4" (19mm) Hose
No. 491080 1"
(25mm) Hose |
| 
Our HTS units treat incoming water to reduce flushing water toilet smells, by
combating micro growth in the system, and reducing scale. Environment friendly
(no formaldehyde). The standard HTS is simple to fit in-line between the toilet
pump and the bowl inlet. The larger unit fits in-line, mounted e.g.. onto a bulkhead
and is suitable for boats in very regular use. |
No.
125404 Standard HTS
No. 125405
Larger HTS
No. 125404R Refill for
Standard
No. 125405R
Refill for Larger |
| |
These skin fittings
are made from marine grade bronze, with an unobtrusive slim-line flange. |
| Part
No. | Pipe
Thread | Flange
Dia | | 112938
| 1/2"
| 1.1/2" |
| 112939 | 3/4"
| 2.1/8" |
| 112940
| 1"
| 2.3/8" |
| 112941 | 1.1/4" |
2.3/4" | | 112942 | 1.1/2"
| 3.1/8" |
|
More
Skin Fittings A
Heavy Duty version is also available to suit Hire Fleet craft etc. |
