|
 • Fits 3/4" (19mm) Hose to boat's holding tank.
• Tapered Throat grips hose from shore tank.
• Flange Dia.73mm
Hole Dia. 45mm
• Key and I.D. plate standard.
• Bronze finish to special order |
| No. 125402 Leesan Rinse Out Fitting |
|
|
 Designed to prevent water being syphoned onto the boat via the toilet, a vented loop is essential where plumbing is connected to any skin fitting below the waterline. Our vented loops allow air into the line via the vent when not in use which seals up as water passes through the loop. An optional hose tail allows connection to a deck or hull mounted ventilator using 6mm hose. |
No. 125407 Vent Hose Tail 3/4" (Toilet Inlet)
No. 125411 Vent Hose Tail 1" (Electric Macerator)
No. 125412 Vent Hose Tail 1.1/2" (Toilet Discharge) |
Ball Valves
|
The Western Marine range of full bore ball valves have widely used BSP threads and are suited to toilet installations.
|
| Part No. |
Pipe Thread |
Part No. |
Pipe Thread |
| 049301 |
1/4" |
049305 |
1" |
| 049302 |
3/8" |
049306 |
1.1/4" |
| 049303 |
1/2" |
049307 |
1.1/2" |
| 049304 |
3/4" |
049308 |
2" |
|
P
|
 Enables deck fitting without probe o-ring facility (threads only) to connect to quayside probe. Also improves pumping efficiency for deck fittings with worn seals. Fits ISO4567 G1.1/2" (1.1/2" BSP threads) |
| No. 125408 |
| Also Available |
|
 Pump Out Station Sign
GRP sign with logo to ISO standard
No. 125406 Pump Out Sign Holding Tanks Both rigid and flexible available.
|
| Ask for details. |
|
|
|
 • Standard type pump out fitting connects to both probe and screw type quayside pump out stations.
• Flange Dia. 99mm. Hole Dia. 65mm
• Easily replaceable O-Ring for a good seal to pump out station probe.
• Complete with hex head key and identification plate.
• Polished chrome as standard - brass to special order.
• Accepts hose of 38/50/63mm dia. from holding tank. |
| No. 125401 Leesan Pump Out Fitting. |
|
 • Developed specifically for marine installations, it combines excellent odour protection and flexibility.
• Smooth internal & external surfaces ensure a snug fit onto connections.
• Fits standard 1.1/2" (38mm) toilet outlets.
• Minimum Bend Radius 100mm.
• Weight 0.76kg./m
• Suitable for toilet waste only. |
|
No. 125403 Leeflex Toilet Outlet Hose
Also available is less expensive sanitation hose for toilet inlet and
electric macerator toilet installations.
No. 491079 3/4" (19mm) Hose
No. 491080 1" (25mm) Hose
|
|
 Our HTS units treat incoming water to reduce flushing water toilet smells, by combating micro growth in the system, and reducing scale. Environment friendly (no formaldehyde). The standard HTS is simple to fit in-line between the toilet pump and the bowl inlet. The larger unit fits in-line, mounted e.g.. onto a bulkhead and is suitable for boats in very regular use. |
No. 125404 Standard HTS
No. 125405 Larger HTS
No. 125404R Refill for Standard
No. 125405R Refill for Larger |
|
|
These skin fittings are made from marine grade bronze, with an unobtrusive slim-line flange.
|
| Part No. |
Pipe Thread |
Flange Dia |
| 112938 |
1/2" |
1.1/2" |
| 112939 |
3/4" |
2.1/8" |
| 112940 |
1" |
2.3/8" |
| 112941 |
1.1/4" |
2.3/4" |
| 112942 |
1.1/2" |
3.1/8" |
|
More Skin Fittings
A Heavy Duty version is also available to suit Hire Fleet craft etc.
|
