Ratchet mount - RA 135
|
 Ratchet mount reinforced nylon UV resistant.
Four way ratchet mount for installation on deck or bulkhead, locking by knob.
Hole for loran or GPS cable.
For antennas max 8' in self supporting installation built in feed - thru for coax cable.
Standard thread 1"x14. |
| No. 072344 |
Universal mount - V 1974
|
 Universal mount stainless steel.
For supporting antennas and extensions.
Standard thread 1" x 14, weight 240 grs.
Height 100 mm. (4"). |
| No. 072347 |
Universal mount - V 1975
|
 Universal mount reinforced nylon only for GPS antennas.
Can be used in addition to RA129 extension. Standard thread 1" x 14. Weight 50gr. Height 10cm (4"). |
| No. 072357 |
V 9171
|
 Pipe mounting bracket in stainless steel, thread 1"x14.
For horizontal and vertical mount.
Weight 600 gr. For tubes diam. 25-80 mm.
ELECTROPOLISHED |
| No. 230813 |
Rail ratchet mount - RA 125
|
 Rail ratchet mount reinforced nylon U.V. resistant.
Ratchet design with hole for loran or GPS cable.
Vertical or horizontal installation on rails of 7/8" (22mm) and 1" (25mm).
Designed for antennas up to eight feet.
Standard thread 1"x14. |
| No. 230824
|
Antenna Brackets
|
Nylon adjustable antena mounting bracket, suitable for all antennas with 14tpi threads.
No. 481394
Chrome on Brass adjustable mounting bracket. Suitable for all antennas with 14tpi.
|
| No. 113287 |
DG3-8
|
 Through-Deck Gland for cable 3mm to 8mm. Supplied with blanking off cap. Allows VHF cable to pass through deck or bulkhead without removing plug.
|
| No. 230828
|
Male Antenna Connector - RA 132
|
 PL259 male connector for RG58/U.
Twist on. |
|
No. 072321
|
Double female connector - RA 133
|
 PL258 Double female connector for PL259. |
| No. 072322 |
bnc5
|
 A pair of push & twist in-line connectors for joining 5mm dia coax such as RG58CU. Supplied with damp-proof seals.
|
| No. 230816 |
More Antennas |
|
Masthead bracket - V 1976
|
 Masthead bracket in stainless steel. Height 20cm (8").
Electropolished |
| No. 072346 |
Stand off bracket - RA 119
|
 Stand off bracket - reinforced nylon for bulkhead and rail of 25mm (1") and 30mm. Accepts 38.5mm (1.5") antennas. |
| No. 230815 |
Ratchet mount - RA 116
|
 Ratchet mount polished stainless steel. Four way ratchet mount for installation on deck or bulkhead,locking by handle.
Hole for loran or GPS cable.
The exclusive built-in feed-thru allows the passage of coax cable.
Standard thread 1"x14".
ELECTROPOLISHED |
| No. 072342 |
Ratchet mount - RA 115
|
 Ratchet mount reinforced nylon UV resistant. Four way ratchet mount for installation on deck or bulkhead, locking by handle.
Hole for loran or GPS cable.
The exclusive built-in feed-thru allows the passage of coax cable.
For antennas max 9' in self supporting installation.
Standard thread 1"x14. |
| No. 072341 |
Rail mount - RA 145
|
|
 Rail mount reinforced nylon UV resistant.
For installation of GPS antennas on horizontal rails of 7/8" (22mm) and 1" (25mm), (can be used in addition to RA129 extension).
Standard thread 1"x14.
|
| No. 230810 |
RA 140
|
 Nylon Feed -Thru For deck passage of one or two coaxial cables and connectors (RG58 or similar). |
| No. 072345 |
PVC gasket - V9101
|
 PVC gasket for alluminium surface insulation for V9174 and V9124. |
| No. 072348 |
adapt1
|
| Adapts a 1"x 14tpi RangeMaster mount to accept an M16 YachtMaster antenna. |
| No. 230817 |
| adapt2 |
| Adapts a 16mm YachtMaster bracket to accept a 1"x 14tpi RangeMaster antenna. |
| No. 230818 |
| n5 |
 DeckMate waterproof deck connector for 5mm coax. Inherhently water-proof but supplied with rubber boot for extra protection. |
| No.230822 |
Chart plotter mount - RA 136
|
 Kit for installation of electronic chart plotters allows installation of the plotters on a vertical tube diam. 25mm (1") and 22mm (7/8").
The plotter can be adjusted on the vertical and horizontal axis, when not used the mount can be folded by the swivel rail mount installed on the vertical tube. |
|
No. 072358
|
Chart plotter mount - RA 137
|
 Kit for installation of electronic chart plotters, allows installation of plotters on a horizontal tube of 25mm (1") and 22mm (7/8") diameter.
The plotter can be adjusted on the horizontal axis by the ratchet lock UP. |
|
No. 072359
|
|
